# Mechanical Engineering Diploma Degree Engineers Recruitment Exam 100 Solved Questions

## Mechanical Engineering Diploma Degree Engineers Recruitment Exam 100 Solved Questions

The Mechanical Engineering Diploma Degree Engineers Recruitment Exam Solved Question Paper published here which is useful for preparing upcoming recruitment of Assistant Mechanical Engineers/ Mechanical Engineers

### Question Paper Details

Exam : Mechanical Engineers Recruitment Exam

Question Paper Format: pdf/ Jpeg/txt

No. of Questions: Total 100 Questions

No. of Pages: 12 Pages+ 1 Page Answer Key

### Mechanical Engineering Diploma Degree Engineers Recruitment Exam Solved Questions Page 1

Question #1:-Ferrule is a
A:-End opposite to tang
B:-Part fitted to the tang for holding the file
C:-Protective metal ring to prevent cracking of the handle
D:-Narrow an thin part of a file which fits into the handle
Question #2:-Bench vice is specified by
A:-Length of jaws
B:-Maximum opening of jaws
C:-Overall length of vice
D:-Width of jaws

Question #3:-Which vice is used for forging work ?
A:-Tool maker’s vice
B:-Leg vice
C:-Machine vice
D:-Bench vice
Question #4:-What is the expansion of MKS System ?
A:-Millimeter, Kilogram and Second system
B:-Metre, Kelvin and Second system
C:-Millimetre Kilo Pascal and Second system
D:-Metre, Kilogram and Second system
Question #5:-How much is the accuracy of try square ?
A:-0.001 mm per 10 mm length
B:-0.01 mm per 10 mm length
C:-0.002 mm per 10 mm length
D:-0.02 mm per 10 mm length
Question #6:-Which type of rule is used in pattern making ?
A:-Shrink rule
B:-Short rule
C:-Narrow rule
D:-Hook rule
Question #7:-How many seconds are in one degree ?
A:-60 seconds
B:-360 seconds
C:-6000 seconds
D:-3600 seconds
Question #8:-The least count of steel rule is
A:-0.05 mm
B:-0.50 mm
C:-0.1 mm
D:-1 mm
Question #9:-The graduations are marked in Bevel protractor are
A:-0° – 90°
B:-0° – 180°
C:-0°– 360°
D:-0° – 90° and 90° – 0° and so on

Question #10:-What is the unit of Temperature in British system ?
A:-Fahrenheit
B:-Celsius
C:-Kelvin
D:-Rankine

### Mechanical Engineering Diploma Degree Engineers Recruitment Exam Solved Questions Page 2

Question #11:-Which of the following surface plate retain their accuracy even if the surface is scratched ?
A:-Cast iron
B:-Mild steel
C:-Granite
D:-Alloy steel
Question #12:-Combination set consist of
B:-Centre square, bevel protractor, steel rule and centre head
Question #13:-Which marking media will give very clear lines but take more time for drying than other marking media ?
A:-White wash
B:-Cellulose lacquer
C:-Copper sulphate
D:-Prussian blue
Question #14:-What is the value of one Micron ?
A:-1/10 mm
B:-1/100 mm
C:-1/1000 mm
D:-1/10000 mm
Question #15:-How the Divider is specified ?
A:-Overall length of divider
B:-Overall length except peg
C:-Distance from the point to the centre of the fulcrum roller of the leg
D:-Distance from the point to the peg
Question16:-Which of the following statement is/are correct about the use of Universal Surface gauge ?
I. Scribing lines parallel to a curved edges
II. Setting jobs on machine parallel to Datum surface
III. Check the height and parallelism of jobs
IV. Mark the lines at any angle and mark parallel lines
A:-I and II
B:-II and III
C:-I and IV
D:-III and IV
Question #17:-Which grades of angle plates are used for very accurate tool room type work ?

Question18:-Which Caliper is used to find the centre of round rod ?
A:-Transfer Caliper
B:-Vernier Caliper
C:-Jenney Caliper
D:-Spring Caliper
Question19:-Point angle of prick punch is
A:-30°
B:-60°
C:-90°
D:-120°
Question20:-Which material is used for making Scriber ?
A:-Cast steel
B:-Mild steel
C:-High speed steel
D:-High carbon steel

### Mechanical Engineering Diploma Degree Engineers Recruitment Exam Solved Questions Page 3

Question21:-_______ is the difference between the maximum limit of size and the minimum limit of size.
A:-Deviation
B:-Tolerance
C:-Limit of size
D:-Upper deviation
Question22:-The curved cut files are available only in a _______ shape.
A:-Flat
B:-Curved
C:-Half round
D:-Round
Question23:-In 150 mm length of Bastard file, how may number of cuts over the length of 10 mm ?
A:-8
B:-13
C:-17
D:-24
Question24:-Most files have the faces slightly bellied length wise. This is known as _______ of a file.
A:-Concavity
B:-Convexity
C:-Eccentricity
D:-None of the above
Question25:-What is the pitch of hacksaw blade used to cut brass tubing, copper, iron pipe etc. ?
A:-0.8 mm
B:-1.4 mm
C:-1.8 mm
D:-1 mm
Question26:-What is the name of angle marked x shown in figure given below ?
A:-Point angle
B:-Rake angle
C:-Clearance angle
D:-Helix angle
Question27:-_______ is the distance a drill advances into the work in one complete rotation.
A:-Cutting speed
B:-RPM
C:-Feed
D:-Diameter of the drill
Question28:-What is the taper angle of second tap shown in figure given below ?
A:-4°
B:-12°
C:-10°
D:-20°
Question29:-_______ is an operation of bevelling the end of a drilled hole.
A:-Spot facing
B:-Counterboring
C:-Countersinking
D:-Reaming
Question30:-Which gauge is used to check the radius formed on the edges of an components ?
A:-Plug gauge
B:-Ring gauge
C:-Slip gauge

### Mechanical Engineering Diploma Degree Engineers Recruitment Exam Solved Questions Page 4

Question31:-In metric micrometer the pitch of the spindle thread is _______
A:-0.01 mm
B:-0.1 mm
C:-0.5 mm
D:-1 mm
Question32:-The micrometer works on the principle of _______
A:-Rack and pinion
B:-Screw and nut
C:-Sliding
D:-None of the above
Question33:-In a Dial Caliper, the Dial hand is operated by ______ system on the beam.
A:-Screw and nut
B:-Sliding
C:-Rack and pinion
D:-None of the above
Question34:-In vernier height gauge ______ is used on the movable jaw, when it is required to take measurement from the lower place.
A:-Straight scriber
B:-Bent point scriber
C:-Off set scriber
D:-None of the above
Question35:-What is the least count of vernier bevel protractor ?
A:-1 MSD – 1 VSD
B:-2 MSD – 1 VSD
C:-1 VSD – 2 MSD
D:-2 VSD – 1 MSD
Question36:-Which grade slip gauge is used for precision tool room applications ?
Question37:-What is the purpose of holes drilled across sine bar ?
A:-Easy for handling
B:-For decorative purpose
C:-For reducing the weight and also it facilitate clamping of sine bar on angle plate
D:-For accommodate round bars
Question38:-What is the name of Jig shown in figure given below ?
A:-Trunnion Jig
B:-Drill Jig
C:-Post Jig
D:-Box Jig
Question39:-The ability to select components for assembly at random and fit them together within proper tolerance is called ______
A:-Selective Assembly
B:-Non selective
C:-Interchangeability
D:-Necessity of the limit system
Question40:-Cast iron cannot be foged because it has the property of
A:-Softness
B:-Stiffness
C:-Toughness
D:-Brittleness

### Mechanical Engineering Diploma Degree Engineers Recruitment Exam Solved Questions Page 5

Question41:-The included angle of BA thread is
A:-55°
B:-45°
C:-60°
D:-471
2
°
Question42:-The weight of Engineer’s hammer is varies from
A:-100 gm – 1000 gm
B:-125 gm – 1500 gm
C:-200 gm – 2000 gm
D:-250 gm – 2500 gm
Question43:-If two bevel gears are symmetrical to each other and transmit motion at right angle such gears may be called
A:-Spur gear
B:-Helical gear
C:-Mitre gear
D:-Worm shaft and worm gear
Question44:-The belt turns on a pulley it tends to stretch on the contact area of the driving pulley and shorten on the driven pulley. This localized movement of the belt is a direct result
of elastic stretch and is known as
A:-Creep
B:-Slip
C:-Arc of contact
D:-None of the above
Question45:-Which belt is generally used, when the distance between the shaft is too short ?
A:-V belt
B:-Flat belt
D:-Ribbed belt
Question46:-What is the name of bearing used, when the loading is parallel to the bearing axis ?
A:-Thrust bearing
B:-Split bearing
Question47:-Which key is used for transmitting light torque ?
A:-Feather key
B:-Woodruff key
C:-Round key
Question48:-What is the name of clutch shown in figure given below ?
A:-Air clutch
B:-Multiplate clutch
C:-Cone clutch
D:-Over riding clutch
Question49:-In which tooth type lock washers are used, when the mounting holes are over size ?
A:-Internal type
B:-Internal and external type
C:-External type
D:-Countersunk type
Question50:-Which alloy is used to make the bearing for work at higher temperature and have higher load carrying capacity ?
A:-Aluminium alloy
D:-Sintered alloy

### Mechanical Engineering Diploma Degree Engineers Recruitment Exam Solved Questions Page 6

Question51:-The process which helps in producing a fine grain for uniformity of structure and for improved mechanical properties is known as
A:-Tempering
B:-Annealing
C:-Hardening
D:-Normalizing
Question52:-Which one of the following is an alloy of carbon and iron in which carbon in combined state ?
A:-Steel
B:-Wrought iron
C:-Cast iron
D:-Pig iron
Question53:-Carbon dissolved in the iron to form a solid solution is called
A:-Cementite
B:-Ferrite
C:-Pearlite
D:-Austenite
Question54:-If the hot steel is the cooled rapidly the austenite changed in to a new structure called Martensite which property of steel is increase
A:-Hardness
B:-Ductility
C:-Malleability
D:-Brittleness
Question55:-Which cast iron has the ability to reduce vibration and tool chattering in machine tools ?
A:-Grey cast iron
B:-White cast iron
C:-Nodular cast iron
D:-Malleable cast iron
Question56:-What is the name of heat treatment process for reheating the hardened steel to a temperature below 400 degree centigrade followed by cooling ?
A:-Annealing
B:-Hardening
C:-Tempering
D:-Normalizing
Question57:-Why tempering process is carried out in
B:-To relieve stress and strain
C:-To refine the grain structure
D:-To regulate the hardness and toughness
Question58:-What is the purpose of brine solution, water, oil and air used in heat treatment process ?
A:-Soaking
B:-Quenching
C:-Heating
D:-Cooling
Question59:-Name the property of metal that withstand shock or impact
A:-Tenacity
B:-Hardness
C:-Brittleness
D:-Toughness
Question60:-Which metal is used for magnets and ball bearing ?
A:-Cobalt
D:-Molybdenum

### Mechanical Engineering Diploma Degree Engineers Recruitment Exam Solved Questions Page 7

Question61:-Which one of the following is the function of tuyers in the forge ?
A:-Permits cooled air
B:-Control smokes and sparks
C:-Act as outlet of products of combustion
D:-No function
Question62:-Which among the following is a term used in forging in which the thickness of the job is increased by decreasing the length ?
A:-Drawing out
B:-Punching
C:-Drifting
D:-Jumping
Question63:-Forging is done when the metal is in
A:-Liquid condition
B:-Plastic condition
C:-Elastic condition
D:-Plasma condition
Question64:-Which one of the following operations are performed when bottom swage and top fuller used together ?
A:-Hollowing
B:-Drawing out
C:-Jumping
D:-Bending
Question65:-Function of clearance angle in a lathe cutting tool is
A:-Reduce heat generation
B:-Increase the tool life
C:-Allows the chip to flow freely
D:-Avoid rubbing of tool with the work
Question66:-Which among the following is a forging defect which occurs during upsetting process when faces of the stock become square ?
A:-Buckling of stock
B:-Folds
C:-Surface and internal cracks
D:-None of the above
Question67:-Which one of the following is used for bending hooks of flat and round steel bars ?
B:-Bending blocks
C:-Bolster swages
D:-Fork tools
Question68:-The instrument used to measure high temperature in furnace is
A:-Thermometer
B:-Barometer
C:-Calorimeter
D:-Pyrometer
Question69:-Fullers are used for
A:-Necking and grooving
B:-Forming heads of rivets, bolts etc.
C:-Making shoulders with right angles
D:-Drawing down
Question70:-The process of local thinning down of a stock by forging operation is called as
A:-Setting down
B:-Drawing down
C:-Swaging out
D:-Punching

### Mechanical Engineering Diploma Degree Engineers Recruitment Exam Solved Questions Page 8

Question71:-Which tool used for closing down the edges of plate and head of rivet ?
A:-Fullering tool
B:-Caulking tool
C:-Punch
D:-Both 1 and 2
Question72:-Which hammer is used for preparing for wire edge on sheet metal work ?
A:-Ball peen hammer
B:-Planning hammer
C:-Creasing hammer
D:-Riveting hammer
Question73:-Which stake is useful for making sharp bends, folding edges of sheet metal ?
A:-Funnel stake
B:-Hatchet stake
C:-Horse stake
D:-Grooving stake
Question74:-Pittsburgh seam is also known as
A:-Collar lock
B:-Hammer lock
C:-Flanged lock
D:-Dovetail lock
Question75:-Allowance for paned down joints is
A:-3W + 3T
B:-W + 2T
C:-2W + 3T
D:-2W + 2T
Question76:-What is the name of coupling show in figure given below ?
A:-Muff coupling
B:-Flange coupling
C:-Pin bush coupling
D:-Chain coupling
Question77:-The distance from the edge of the plate to the center of the nearest rivet (diameter of rivet is d) is
A:-3d
B:-2d
C:-1.5d
D:-2d + 6
Question78:-Which a statement is/are correct about hand lever punch ?
i. For marking holes when too much holes are to be punched
ii. For punching small holes in thin metal sheet
iii. The tool consists of a punch and die
iv. To mark the center of holes to be drilled
A:-Only i and iii
B:-Only ii and iv
C:-Only ii and iii
D:-Only i and ii
Question79:-Which method of pattern layout is used for prisms or cylinders ?
A:-Triangulation
C:-Parallel line
D:-Geometrical construction
Question80:-Choose the correct matching sequence of the following
1. Single seam a. Used to join the bottom of a container to its body
2. Double seam b. Used to join a bottom to vertical bodies of various shapes
3. Dovetail seam c. Formed edge is bent upward against the body
4. Flanged seam d. Used to join flat plate to a cylindrical piece
A:-1-c, 2-a, 3-d, 4-b
B:-1-d, 2-b, 3-c, 4-a
C:-1-b, 2-a, 3-d, 4-c
D:-1-b, 2-c, 3-d, 4-a

### Mechanical Engineering Diploma Degree Engineers Recruitment Exam Solved Questions Page 9

Question81:-Which type shade number of filter colour glass is used for manual arc welding up to 100 amperes ?
A:-10 – 11
B:-12 – 14
C:-8 – 9
D:-5 – 7
Question82:-What is the point where the weld face joints the parent metal ?
A:-Weld face
B:-Toe of weld
C:-Fusion face
D:-Weld junction
Question83:-What is the range of coating factor for medium coated electrodes ?
A:-2.20 to 2.50
B:-1.60 to 2.20
C:-1.40 to 1.50
D:-1.25 to 1.30
Question84:-What are the substances used to make the welds stronger ?
A:-Deoxidizers
B:-Gas forming substances
C:-Slag forming substances
D:-Arc stabilising substances
Question85:-Which size cutting nozzle is used for gas cutting 19 – 100 mm thickness plate ?
A:-0.8 mm
B:-2.4 mm
C:-1.2 mm
D:-1.6 mm

Question #86:-Which statement is/are correct about mild steel electrode ?
i. It contain silicon above 0.5%
ii. It contain carbon 0.1 to 0.3%
iii. During welding the electrode will tend to get red got quickly
A:-Only i and iii
B:-Only i and ii
C:-Only ii and iii
D:-All of the above i, ii and iii

Question87:-The percentage of carbon and hydrogen in acetylene gas is
A:-Carbon 91.3% and Hydrogen 8.7%
B:-Carbon 92.3% and Hydrogen 7.7%
C:-Carbon 93.3% and Hydrogen 6.7%
D:-Carbon 94.3% and Hydrogen 5.7%

Question88:-Which statement is correct about the rightward welding techniques ?
i. The rightward technique is used to welding steel having thickness above 5 mm
ii. The rightward technique is used to welding steel having thickness up to 5 mm
iii. There is more heat concentration for fusion, and hence useful for welding thick jobs
iv. There is less heat concentration for fusion, and hence useful for welding thin jobs
A:-Only i
B:-Only ii and iv
C:-Only i and iii
D:-Only ii

Question89:-In thermit welding, thermit is a mixture of
A:-Iron oxide and Aluminium
B:-Zinc oxide and Aluminium
C:-Charcol and Iron oxide
D:-Charcoal, Iron oxide and Aluminium

Question90:-The straight line which bisecting two toe points is known as
A:-Toe line
B:-Toe of weld
C:-Fillet line
D:-Miter line

### Mechanical Engineering Diploma Degree Engineers Recruitment Exam Solved Questions Page 10

A:-Slotted nut
B:-Changing gears
C:-Castile nut
D:-Split nut

Question92:-The micrometers dial on the cross slide hand wheel, with the accuracy of
A:-0.5 mm
B:-0.05 mm
C:-0.2 mm
D:-0.02 mm

Question93:-In lathe, which gear mechanism is used for changing the direction of rotation of the lead screw and feed shaft ?
A:-Change gear unit
B:-Quick change gear box
C:-Apron mechanism
D:-Tumbler gear

Question94:-Which statement is/are correct about compound rest method ?
i. Both hand feed and power feed can be given
ii. Steep tapers can be produced
iii. Threads on the taper portion can not be produced
iv. Both internal and external tapers can be produced
A:-Only i and iii
B:-Only i and ii
C:-Only ii and iv
D:-Only iii and iv

Question95:-Which center is used to support the end of the job where no countersink hole is permitted ?
A:-Insert type center
B:-Half center
C:-Female center
D:-Tipped center

Question96:-What is the formula used to find taper angle by tail stock offset method ?
A:-Set-over = (D-d)L/2I
B:-Set-over = (D-d)I/2L
C:-Set-over = (D-d)/2L
D:-Set-over = (D-d)/I

Question97:-Which one of the following standard taper is provided in the tailstock barrel ?
A:-Metric taper
B:-Morse taper
C:-Jarno taper
D:-Brown and Sharpe taper

Question98:-Which statement is/are correct about four jaw chuck ?
i. Separate internal and external jaws are available
ii. Each jaws has square thread provided
iii. There is no loss of accuracy as the chuck gets worn out
iv. Jaws move upward or downward, depending up on the rotation of crown wheel
A:-Only i and iii
B:-Only i and iv
C:-Only ii and iii
D:-Only iii and iv

Question #99:-Which work holding device are serve as a fixture ?
A:-Four jaw chuck
B:-Catch plate
C:-Face plate
D:-All of the above